Security Levels :

KID SAFE

G (General Audiences) : All Ages Admitted

PG (Parental Guidance suggested) : Some material may not be suitable for young children.

PG 13 (PG-13 Parents strongly cautioned) : Some material may be inapproriate for children under 13.

PGR (Parental Guidance Recommended) : These are not necessarily unsuitable for children, but viewer discretion is advised, and parents and guardians are encouraged to supervise younger view-

ers.

R (Restricted) : Under 17 requires accompanying adult

NC17 (NC-17) : No one 17 and under admitted.

ADULT

Note:

- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.

Changing the Password

To change the password, follow these steps:

1.On the Settings Menu, Select Security, and then press the ENTER button.

2.Enter the current 4 digit password. If you have never changed the password, enter the default password: 0000. To enter a number, use the /®/π/buttons to highlight a number, and then press the ENTER button.

3.Select Change Password, and then press the ENTER button.

4.Enter the new 4 digit password. Use the /®/π/buttons to select a number, and then press the ENTER button. Repeat 4 times.

5.Re-enter the new password in the same manner to confirm. The Security menu re-appears.

Setting Up the General Options

1.With the unit in Stop mode, press the MENU button. Press the /® buttons to select SettingS, then press the ENTER button.

2.Press the π/buttons to select General, then press the ® or ENTER button.

3.Press the π/buttons to select the desired item, then press the ® or ENTER button.

Setting Up the Support Options

Support option enable you to check your DVD player information such as the model code, Software Version, The serial and version numbers can be found on the back side of your DVD- Player.

1.With the unit in Stop mode, press the MENU button. Press the /® buttons to select SETTINGS, then press the ENTER button.

2.Press the π/buttons to select SUPPORT, then press the ® or ENTER button.

3.Select PRODUCT INFORMATION, then press the ® or ENTER button.

Reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Problem

Action

 

 

The screen is blocked.

• Press the ® button (in front panel) for more than 5 seconds under no

disc inside. All setting will revert to factory settings.

 

 

 

 

• Press the ® button (in front panel) for more than 5 seconds under no

Forgot password.

disc inside. All setings including the password will revert to the factory

 

settings. Don't use this unless absolutely necessary.

 

 

 

• 5.1 channel sound is reproduced only when the following conditions are met. :

5.1 channel sound

1) The DVD player is connected with the proper Amplifier

is not being repro-

2) The disc is recorded with 5.1 channel sound.

duced.

• Check whether the disc being played has the “5.1 ch” mark on the outside.

(DVD-E370,E365)

• Check if your audio system is connected and working properly.

 

• In a SETUP Menu, is the Audio Output set to Bitstream?

 

 

13

Page 13
Image 13
Philips DVD-E350, DVD-E365 Reference, Setting Up the General Options, Setting Up the Support Options, Troubleshooting