Philips DVD755VR/00 owner manual Connecting to Optional Equipment, Connections Cont’d

Connecting to Optional

Equipment

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic

Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2 or DTS)

Connect one of this unit’s DIGITAL AUDIO OUT jack

1 (COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (coaxial) audio cable.

You will need to activate this unit’s digital output. (See

2 “Digital Audio Output” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Warning:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Connections (Cont’d)

Notes

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

–To see the audio format of the current DVD in the On-Screen Display, press AUDIO.

	VCR IN+OUT/DVD OUT	DVD/VCR	DVD
			EXCLUSIVE
AERIAL		AUDIO OUT	OUT
			AUDIO
	EURO AV2		OUT
	DECODER
		R
			R
RF OUT	EURO AV1	L
	AUDIO/
	VIDEO		L
DVD/VCR
OUT
			COAXIAL

2 channel analog stereo or Dolby Pro Logic ll / Pro Logic connection.

English

11