PREPARATION 23
- Black level shift (NTSC only)
Adapts the color dynamics to obtain richer contrasts.Select ON or
OFF.
- Video shift
The factory centers the video on your screen.Use this setting to
personalize the position of the picture on your TV by scrolling it to the
left or right.
- Color settings (For YUV only)
You can select one of five predefined sets of color settings and one
set (Personal) which you can define yourself.
- Personal color (For YUV only)
Allows you to fine-tune the selected color settings saturation,
brightness and contrast.
Sound
- Digital output
Factory setting:ALL.This means that both coaxial and optical outputs
are switched on.If you are not connecting equipment with a digital
input,change the setting to OFF.
If your equipment doesn't include a digital multi-channel decoder,set
the digital output to PCM (Pulse Code Modulation).Both coaxial and
optical outputs are switched on.
- Analog output
Select Stereo,Dolby Surround, 3D Sound or Multi-channel.
- Night Mode
Optimizes the dynamics of the sound with low volume playback.
- Speaker settings
Allows you to select speaker settings,volume balance and delay time
and to test the speaker settings.
Speaker settings are only active on the Analog Multi-Channel Output.
(See appendix)
- Karaoke vocal
Put this setting to ON only when a multi-channel karaoke DVD is
being played.The karaoke channels on the disc will then be mixed to
a normal stereo sound.
Language
Select the required Menu,Audio and Subtitle language. See ‘Initial Setup’.
Audio language and Subtitle language can also be adapted via the Menu
bar on the screen.