DVD Menu Options (continued)
Digital Output
Set the Digital Output according to your optional audio equipment connection.
{All }
Select this if the connected device has a
{PCM Only }
Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and
{SPDIF Off }
To deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect to a TV or stereo system.
LPCM Output
If you connect the DVD player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’.
{48K }
Playback a disc recorded at the sampling rate of 48kHz.
{96K }
Playback a disc recorded at the sampling rate of 96kHz. This rate can only be achieved in
Tip:
–Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better sound quality. LPCM Output can be selected only when PCM Only is activated.
Using the Video setup menu
APress SETUP on the remote control. The system setup menu appears.
General Audio Video Preference
- - Video Setup Page - -
TY Type
TV Display
Progressive
Closed Captions
Sharpness
Brightness
Contrast
Color
BPress W X to select { Video Setup Page }.
CPress S T to select an item, then press X to access.
Example: { TV Display }
The options for the selected item appears.
If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DUse S T to select a setting and press OK to confirm.
Example: { 4:3 Pan Scan }
The setting is selected and setup is complete.
ETo exit, press SETUP.
English
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
31
