Philips DVP3005K/93 user manual Audio Setup Menu, Analog Output, Lt/Rt, Surr, Digital Audio Setup

DVD Setup Menu Options

Audio Setup Menu

1In disc mode, press SYSTEM MENU.

2Press 1 2 to select ‘Audio Setup’ icon.

3Press OK to confirm.

- - Audio Setup Page - -

Analog Output

Digital Audio Setup

Sound Mode

Speaker Setup

CD Upsampling

Night Mode

Go to Audio Setup Page

Analog Output

Set Analogue Output to match your DVD Player’s playback capability.

1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {ANALOG OUTPUT}, then press 2.

Stereo

Select this option when output delivers sound from only the two front speakers.

LT/RT

Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

V SURR

Allows the DVD player to use virtual surround sound effects.

Multichannel

Select this to enable Multi-channel output.

2Press 3 4 to select a setting, then press OK to confirm your selection.

Digital Audio Setup

The options included in Digital Audio Setup are:‘Digital Output’ and ‘LPCM Output’.

1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {DIGITAL AUDIO SETUP}, then press 2.

2Press the 3 4 keys to highlight an option.

3Enter its submenu by pressing 2.

4Press 3 4 to select a setting, then press OK to confirm your selection.

Digital Output

Set the Digital output according to your optional audio equipment connection.

➜All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.

➜PCM Only: Only if your receiver is not capable of decoding multi-channel audio.

Helpful Hints:

–If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.

LPCM Output

If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.

➜48kHz: Playback a disc recorded at the sampling rate of 48kHz.

➜96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic (Flat) mode.

Helpful Hint:

–LPCM Output can be selected only when PCM Only is activated.

E n g l i s h

TIPS: To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.

29

01-41 DVP3005K_93_RC2 29 26/09/05, 9:59 AM