52_ main menu
main menu

Setting the pTZ

To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the <remote devices> settings. (Page 56)
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in <device> window to
move to <Camera>, and press [enTer] button.
2. Select <pTZ>.
A window of PTZ settings appears.
3. Use direction buttons (▲▼_ +) to move to a desired item,
and select it.
•ID : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote control.
•Protocol : Set the protocol of the connected camera of each
channel.
M `You can check the camera’s ID and protocol if you turn the camera off and on after connecting it to the DVR.
4. When the PTZ setup is done, press <oK>.
CH ID Protocol
1 0 > None
2 1 > None
3 2 > None
4 3 > None
5 4 > None
6 5 > None
7 6 > None
8 7 > None
Camera
PTZ
Camera
Previous/Next Page
OK Cancel