Samsung SDHP4080 user manual Network Configuration, Connection Mode, Setting the Connection

main menu

Network Configuration

It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with events. You can configure the network environment which enables such functions.

Connection Mode

You can set the network connection route and protocol.

Setting the Connection

Sets the protocol and environment of the network.

Using the mouse may help make setup easier.

1.Press the [MENU] button on the remote control.

2.Use the left/right button (_ +) to select <Network>. Network menu is selected.

3.Use the up/down buttons (▲▼) to move to <Connection Mode>, and press [ENTER] button.

Logout Return

Network

Connection Mode

DDNS

Live Transfer

Mailing Service

4.Select <Interface>.

A window of connection mode setup appears.

5.Use direction buttons (▲▼_ +) to move to a desired item, and set the value.

•IP Type : Sets the network connection mode.

•Transfer Bandwidth : Sets the maximum data flow to be transferred. (Upload speed)

Options will vary depending on the selected connection mode.

-- For <Static>, <DHCP> : Select one from 50 kbps ~ 2Mbps, and Unlimited.

-- For <PPPoE>, select one from 50 kbps ~ 600 kbps.

Connection Mode
Interface	Port
 IP Type	Static
 Transfer Bandwidth	2Mbps
 IP Address	192.168.1.200
 Gateway	192.168.1.1
 Subnet Mask	255.255.255.0
 DNS	Manual	168.126.63.1
	OK	Cancel

MM`` If you select <Unlimited> for <Transfer Bandwidth>, HD video is replayed more smoothly on the web viewer. Freezing may occur depending on the network condition.

66_ main menu