84_ web viewer
web viewer
ConneCTinG weB viewer (windows)
1. Open your web browser and type the IP address or URL of
DVR into the URL address box.
M `
“192.168.1.200” is set to IP by default.
`
Set to an available IP address in IP Installer or "Network >
Connection Mode”.
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
2. A user with the admin permissions should provide the
admin ID and password. A registered user should provide
the user ID and password.
J `
The default password can be exposed to a hacking thread so
it is recommended to change the password after installing the
product.
`
Set password for your wireless network if you use the product with a wireless router. Being not protected with
password or using the default wireless router password may expose your video data to potential threat.
`
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
M
`
It allows up to 10 simultaneous access including the Admin and general users.
`
It does not allow multiple login of the Admin user.
`
Initial password of the Admin user is set to “4321”.
`
Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.
`
Normal users should have set <Viewer> under <Permission Management> to “Use” before connecting to the
Web Viewer. (Page 45)
`
All settings are applied by the DVR’s settings.
`
If you change such as the permission settings with logged in to the Web Viewer, you may go back to the log in
screen.
3. Click <install Activex Control...>.
4. When the installation confirm message appear, click [yes]
button.