Internet Camera RXS-3323/RXS-4324

User Manual

 

 

 

PPPoE:

PPPoE: Stands for Point to Point Protocol over Ethernet

Astandard builds on Ethernet and Point-to-Point network protocol. It allows your device with xDSL or cable connects with broadband network directly, then your device can dial up and get a dynamic IP address. For more PPPoE and Internet configuration, please consult your dealer or ISP.

The device can directly connect to the xDSL, however, it should be setup on a LAN environment to program the PPPoE information first, and then connect to the xDSL modem. Power on again, then the device will dial on to the ISP connect to the WAN through the xDSL modem.

The procedures are

• Connect to a LAN by DHCP or Fixed IP

• Access the device; enter Setting -> Network -> PPPoE as below

1.PPPoE:

2.User name:

3.Password:

4.IP address, Subnet mask, and Gateway (read only):

5.Status:

To enable or disable the PPPoE service here.

Type the user name for the PPPoE service which is provided by the ISP. Type the password for the PPPoE service which is provided by the ISP. Shows the IP information got from PPPoE server site.

Shows the Status of PPPoE connection.

Streaming:

RTSP is a streaming control protocol, and a starting point for negotiating transports such as RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for controlling the media stream delivered by a media server. RTSP servers typically use RTP as the protocol for the actual transport of audio/video data.

33

Page 33
Image 33
Rosewill RXS-4324 Streaming, PPPoE 2. User name 3. Password, IP address, Subnet mask, and Gateway read only 5. Status