Rosewill RXS-4324, RXS-3323 user manual Firmware Upgrade procedure, System Restart

Internet Camera RXS-3323/RXS-4324 User Manual

5.Firmware Upgrade procedure:

Warning!!!

The device supports new firmware upgrade (the software that controls the operation in the device). Please contact your dealer for the latest version if necessary.

Download the latest firmware file from our website or your dealer. Unzip this firmware file to binary file and store it into your PC. Then follow the steps as bellows carefully:

1.Close all other application programs which are not necessary for firmware update.

2.Make sure that only you access this device while firmware updating.

3.Disable Motion Detection function.

4.Click “Browse” button. Select the Firmware binary file. (Note that it must make sure that the Firmware only applies to this device, once update, it will be burned into FLASH ROM of system.)

5.Once the firmware file was selected, click “Firmware Upgrade” button.

6.The upgrade progress information will be displayed. Once the uploading process completed, the device will reboot the system automatically.

Please wait for timer countdown, and then you can use IPWizard II to search the device again.

The download firmware procedure can not be interrupted. If the power and/or network connection are broken during the download procedure, it might possibly cause serious damage to the device.

We strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high error rate possibly and don't allow any other clients to access this unit during updating procedure.

Be aware that you should not turn off the power during updating the firmware and wait for finish message. Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade new firmware if it’s not necessary.

6. System Restart:

The device is restarted without changing any of the network settings. It means the IP address of the device will be the same after firmware upgrade.

43