Rosewill RXS-3323 One click to view the, video from the, IPWizardII directly, Lan, Wireless, Exit

Internet Camera RXS-3323/RXS-4324User Manual

(One click to view the	select the device you want to view and click the View button. Then you
video from the	could see the video from camera directly.
IPWizardII directly)
8. LAN	In case you want to change the IP related parameters of wired interface,
	please select the device you want to configure and click the LAN button.
	Further description will be show at below.
9. Wireless	In case you want to change the IP related parameters of wireless interface,
(For RXS-4324 only)	please select the device you want to configure and click the WIRELESS
	button. Further description will be show at below.
10. EXIT	This will close the IPWizard II window.
11. Model Name	This shows you the device model name.
12. Network	This tells you what your connection type is; wired or wireless.
13. DHCP	Here tells that whether your camera is under the DHCP IP or Static IP.
14. WiFi	This tells you what your connection type is; Ethernet only or wireless.
15. Connection	Shows if your connection is successful

- LAN:

Here you can set the IP of the camera to be either by Static or DHCP base on your needs. It is recommended and by default to use DHCP as your IP address of the camera.

You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below.

16