TP-Link TL-WR702N manual Wireless Settings Bridge

TL-WR702N

150Mbps Wireless N Nano Router

server in this device will not start up.

3.If the new LAN IP address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured.

7.6 Wireless

Figure 7-7 Wireless menu

There are two submenus under the Wireless menu (shown in Figure 7-7): Wireless Settings and Wireless Security. Click any of them, and you will be able to configure the corresponding function.

7.6.1Wireless Settings

Choose menu “Wireless → Wireless Settings”, and then you can configure the basic settings for the wireless network on this page.

Figure 7-8 Wireless Settings - Bridge

- 131 -