TP-Link TL-WR702N manual Wireless Advanced

TL-WR702N

150Mbps Wireless N Nano Router

For example: If you desire that the wireless station A with MAC address 00-0A-EB-B0-00-0B and the wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the Router, but all the other wireless stations cannot access the Router, you can configure the Wireless MAC Address Filtering list by following these steps:

1.Click the Enable button to enable this function.

2.Select the radio button “Allow the stations specified by any enabled entries in the list to access” for Filtering Rules.

3.Delete all or disable all entries if there are any entries already.

4.Click the Add New... button.

•Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.

•Enter wireless station A/B in the Description field.

•Select Enabled in the Status pull-down list.

•Click the Save button.

•Click the Back button.

The filtering rules that configured should be similar to the following list:

4.6.4Wireless Advanced

Choose menu “Wireless → Wireless Advanced”, and then you can configure the advanced settings of your wireless network.

- 39 -