TL-WR702N
150Mbps Wireless N Nano Router
5.9.1Firewall
Using the Firewall page, you can turn the general firewall switch on or off. The default setting for the switch is off. If the general firewall switch is off, even if IP Address Filtering, DNS Filtering and MAC Filtering are enabled, their settings are ineffective.
Figure 5-34 Firewall Settings
¾Enable Firewall - the general firewall switch is on or off.
¾Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are two default filtering rules of IP Address Filtering, either Allow or Deny passing through the router.
¾Enable Domain Filtering - set Domain Filtering is enabled or disabled.
¾Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router.
5.9.2IP Address Filtering
The IP address Filtering feature allows you to control Internet Access by specific users on your LAN based on their IP addresses. The IP address filtering is set on this page:
- 85 -
