TL-WR702N
150Mbps Wireless N Nano Router
4.7 DHCP
Figure 4-14 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-14),DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.
4.7.1DHCP Settings
Choose menu “DHCP → DHCP Settings”, and you can see the page as shown in Figure 4-15, if you have chose Smart IP(DHCP) in Network → LAN, in which situation the device will help you configure the DHCP automatically as you need. If you have chose Static IP in Network → LAN, you can see the page as shown in Figure 4-16,and then you can configure the DHCP Server on this page. The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router in the LAN.
Figure 4-15 DHCP Settings
