
TL-WR702N
150Mbps Wireless N Nano Router
¾Enabled AP Isolation - This function isolate all connected wireless stations so that wireless stations cannot access each other through WLAN. This function will be disabled if WDS/Bridge is enabled.
)Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance.
4.6.5Wireless Statistics
Choose menu “Wireless → Wireless Statistics”, and then you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-13 Wireless Statistics
¾MAC Address - The connected wireless station's MAC address
¾Current Status - The connected wireless station's running status, one of
¾Received Packets - Packets received by the station
¾Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.
)Note:
This page will be refreshed automatically every 5 seconds.
- 41 -