
TL-WR702N
150Mbps Wireless N Nano Router
Figure
7.5 Network
Figure 7-5 the Network menu
There is only one submenu under the Network menu (shown in Figure
7.5.1LAN
Choose menu “Network → LAN”, and then you can configure the IP parameters of the LAN on the screen as below.
Figure 7-6 LAN
¾Address Type - Choosing Smart IP(DHCP) to get IP address from DHCP server, or choosing Static IP to configure IP address manually.
¾MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can't be changed.
¾IP Address - Enter the IP address of your Router in
¾Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.
)Note:
1.If you change the LAN IP address, you must use the new IP address to login to the Router.
2.If you select the type of Smart IP (DHCP) and there is a DHCP server forward, the DHCP