62_ main menu
main menu
Setting the motion detection Area
Select <motion region>.
When “motion region” window appears, select a
channel for detection and set the area of motion
detection.
•To set the area in “motion region” window
In the “motion region” window, select desired region
from < >.
•To set the area using <individual> selection
In the “motion region” window, you can select cells
individually by using <individual>.
Motion Region
OK Cancel
Apply to All CH
CH1
Individual
When selected <individual>, “motion region” window disappears and you can select cells one by one.
When the motion area setup is done, press the <menu> on the screen or the [menu] button on the
remote control or front panel to display the “motion region” window again.
- Select : Selected cell is set to be a part of motion detection area.
- Unselect : Selected cell is removed from the motion detection area.
- Inverse : Unselected cells are set to be the motion detection area.
- Menu : After selecting individual motion areas, move to the “motion region” window.
`
If selected <Apply to All CH>, selected motion area is applied to all channels.
When the motion detection setup is done, press <oK>.
Select
Unselect
Inverse
Menu