English _17
● overview

using the numeric buttons

CHANNEL 1–9 Press each button between 1 to 9.
CHANNEL 10 Press the [+10] button first, then press the 0 button again within 3 seconds.
CHANNEL 11–16 Press the [+10] button first, then press any number between 1 to 6 within 3 seconds.

Changing the remote Control id

1. Press the ID button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2. Enter 2 digits of your selection in order, while pressing the [id] button of the remote control.
3. When ID input is done, press the [id] button of the remote control again to check the setting.
M `If you want to change the remote control ID to 08: Press 0 and 8 in order while the [ID] button of the remote control is
pressed.
Remote control’s ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 63)