PRIOR TO CAMERA SETUP

This section describes the camera setup procedures common to accesses from the PC and from the camera.

Buttons Used for Setup

Press the buttons inside the camera, or click the but- tons on the computer display. Each button is assigned functions in the setup as follows.

SET

OWND

PU

IGHTR

EFT

L

 

 

 

LINK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RCV

 

 

 

 

 

 

 

LED

LED

 

 

 

 

 

 

OFF

ON

 

 

 

 

 

 

B

A

 

w

r t

 

 

q

 

w

 

 

 

 

e

r t y u

qMenu ON/OFF button: Opens or closes the setup menu,

wSET button: Validates the selection, opens a detailed menu.

SET button: (Inside the camera)

To open the setup menu, hold this down for 2 sec- onds.

To close the setup menu, move the cursor to END and press [SET].

To return to the previous menu, move the cursor to RET and press [SET].

eESC button: Returns to the previous menu (one layer higher).

rUp/Down button: Moves the cursor up and down. t Left/Right button: Moves the cursor right and left,

selects parameters, adjusts some levels. y RESET/SPECIAL button:

Pressing [Right] and [Left], or clicking RESET/SPE- CIAL: Resets the selected parameter to the factory default when the cursor is on it, or opens the SPE- CIAL menu when the cursor is on END at the bottom of the menu.

u ALL RESET button:

Pressing [Right], [Left], and [SET] buttons simulta- neously or clicking ALL RESET: Resets all settings to the factory default.

Camera Setup Menus

¡From the PC

For details, refer to the PDF manual contained in the supplied CD-ROM.

1.Open the Main Menu of the camera, referring to page 17.

Log in as a level-1 administrator in the dialog box if requested.

2.Click the Setup Menu button on the left side of the screen.

The login dialog box will appear.

Note: Confirm the entered IP address when neither the dialog box nor the Main Menu appears. You may need to re-enter the IP address.

3.Enter the registered user name and password. Note: Enter "admin" when you operate the system

very first time, or you have not registered user names yet. For this time, you need not to enter the password.

Menu control buttons will appear under the camera image.

-19-

Page 19
Image 19
Panasonic WV-NW474SE Prior to Camera Setup, Buttons Used for Setup, Camera Setup Menus, ALL Reset button, ¡From the PC