4.Click the Menu ON button to overlay the ** SET UP ** menu on the camera image. The cursor is highlighted on the window.
5. | Move the cursor to SETUP DISABLE if it is dis- |
| played, or skip to step 7 if ENABLE is displayed. |
6. | Click the SET button. |
| DISABLE will change to ENABLE, and the camera is |
Notes:
•Access the camera again on the
•You can exit from the camera setup by clicking the Return button, though the menu is displayed if the Menu OFF button has not been clicked yet.
¡From the Camera
1.Hold down the [SET] button for 2 seconds.
**SET UP ** will appear, overlaid on the camera image.
** SET UP **
CAMERA↵ |
|
|
|
| ||
NETWORK↵ |
|
|
|
| ||
END |
| SET UP DISABLE | ||||
SET | OWND | PU | IGHTR | EFT | L | |
LINK | ||||||
|
|
|
|
| ||
|
|
|
|
| RCV | |
now ready to be set up. |
Note: While DISABLE is displayed, setup operations |
are disabled. |
Set button
LED | LED |
OFF | ON |
B | A |
Left button
7. Move the cursor to CAMERA O, and click the SET |
button. CAM SETUP opens. |
Notes:
•Refer to the next page for setup operations.
•Return the menu to ** SET UP *** (step 3 above), then go to step 8.
8.Click the Menu OFF button after finishing the setup operations.
The changed settings will be stored in the camera, and the overlaid camera menu will disappear.
Right button
Down button Up button
2.Move the cursor to SETUP DISABLE.
3.Press [SET].
DISABLE will change to ENABLE, and the camera is now ready to be set up.
Note: While DISABLE is displayed, setup operations are disabled.
4.Move the cursor to CAMERA O, and press [SET]. The CAM SETUP opens.
Notes:
•Refer to the next page for setup operations.
•Return to the menu where END is displayed on the bottom, then go to the next.
5.Move the cursor to END, and press [SET] after fin- ishing the setup.
The changed settings will be stored in the camera, and the overlaid camera menu will disappear.
Note: If no button is pressed for 6 minutes, the setup menu disappears.
