Panasonic WV-NW474SE Installation Plans & Preparations, Procurement, Installation space

INSTALLATION

■Installation Plans & Preparations

The supplied camera-mounting bracket can be installed directly on the wall/ceiling or on a procured junction box.

On the bottom of the bracket, there are four 6.5 mm screw holes and six 5.5 mm holes. Use the appropriate holes matching to the installation surface.

An example of flush mounting is shown. This example shows two boxes: one is for camera mounting and the other is for cable junction.

46 mm (1-13/16")

ø5.5 mm (7/32") 83.5mm (3-5/16")

85 (3-3/8")

83.5 (3-5/16")

Bracket Center

85(3-3/8") 46 (1-13/16") 4.4 (3/16")

55 (2-3/16")

6-φ5.5 (6-φ7/32")

4-φ6.5 (6-φ1/4")

7 (9/32")	7/8")
	φ175 (6-

Cable Access Hole φ27 (1-1/16")

Bracket fixing screw x4 (Procured locally)

1. Procurement

• Four screws

Locally procure four bracket fixing screws suitable

for the installation surface and structure of the

wall/ceiling or junction box.

• Junction box

When planning to use a junction box(s), procure one

locally that meets the dimensions in the figure.

An example of surface mounting is shown.

	46 mm
	(1-13/16")
Bracket center	ø27 mm
	(1-1/16")
	Cable access
Cable access hole	hole

2. Installation space

Prepare a space on the surface measuring ø175 mm or more.

3. Cable route

• When routing cables through the wall/ceiling, drill a

ø5.5 mm (7/32")

Bracket fixing screw x4 (Procured locally)

7 mm (1/4) 83.5 mm (3-5/16")

55

(2-3/16")

Sideway cable exit

hole as shown in the figure.

• When routing cables sideways, open the sideway

cable exit unscrewing the lid with a hexagon

wrench.

-9-