Sharp VL-NZ100S Audio Dubbing Feature, Audio Recording, Normal recording mode, Audio Dubbing mode

Advanced Features

Playback

Audio Dubbing Feature	Audio Recording
Available mode:	In normal recording mode

TAPE-VCR

You can add narration to recordings made with this camcorder, while preserving the original audio and video recordings.

Microphone for Audio Dubbing

You can use the built-in stereo microphone to record narration.

Built-in stereo microphone

12-bit audio recording

The audio is recorded in stereo on Audio 1. Audio 1: Stereo (left and right) sound Audio 2: No audio

16-bit audio recording

The audio is recorded in stereo with the left and right sound on two separate channels.

Audio 1: Left sound

Audio 2: Right sound

Advanced Features

Notes:

•Audio dubbing does not function through the DV terminal.

•You cannot use audio dubbing with recordings made in LP mode.

•You cannot use the built-in stereo microphone for audio dubbing when the audio/video cable is connected.

In Audio Dubbing mode

12-bit audio recording

The dubbed audio is recorded on Audio 2. Audio 1: Original stereo (left and right) sound Audio 2: Dubbed stereo (left and right) sound

16-bit audio recording

The dubbed audio is recorded on Audio 2 over the original right sound. Both dubbed and original sounds are mono.

Audio 1: Original left sound

Audio 2: Dubbed sound

Note:

•You can select the 12-bit or 16-bit audio recording mode by performing the procedure on page 37.

53

VL-NZ100H-047-054 53 02.2.14, 10:02 AM