Advanced Features Playback

Advanced Features

Recording from an

External Source

Available mode:

TAPE-VCR

You can use this camcorder to record or edit videos from another source, such as a VCR, TV, or video disc player.

Connect the camcorder to the source equip- ment with the supplied audio/video cable, as shown.

Recording

To AV jack

Audio/video cable (supplied)

Yellow: To video output jack

White: To audio output (L) jack

Red: To audio output (R) jack

Playback

TV with monitor output

VCR

: The arrow shows the signal flow.

21-pin Euro-SCART on TV or VCR

0RCA/21-pin Euro-SCART conversion connector

 

 

(QSOCZ0033TAZZ)

(L/MONO)

(R)

VIDEO AUDIO

AUDIO

 

Video

Audio R

Audio L

 

To Record from an External Source

1 Set the camcorder to TAPE-VCR mode, and insert a Mini DV cassette.

2 Begin playback on the video equipment connected to the camcorder.

Check the camcorder screen to see if the picture is properly received.

3 Press the REC START/STOP button on the camcorder.

The camcorder enters Recording Standby mode.

4 Press m on the Operation button to begin recording.

Notes:

To pause recording, press m. Press m again to resume recording.

To operate by remote control, perform steps 1 and 2 above, and press the REC START/STOP button, then press the PAUSE/STILL button (g).

If “NO SIGNAL” is displayed on the camcorder screen, check that the audio/video cable is properly connected.

To stop recording

Press l on the Operation button.

Notes:

See page 2 for how to open the jack cover.

If the source equipment has only one audio output jack, use the white plug for the audio connection on the source equipment. (The input audio will only be recorded on the left channel of the tape.)

If your TV or VCR has a 21-pin Euro-SCART connector, use the RCA/21-pin Euro-SCART conversion connector (QSOCZ0033TAZZ) available from our main parts distributor detailed on page 78.

Cutting Unwanted Sequences

1 Press m to pause recording when the source tape reaches the beginning of the sequence to be cut.

2 Press m to resume recording when the

source tape reaches the end of the sequence to be cut.

49

VL-NZ100H-047-054

49

02.2.14, 10:02 AM

Page 60
Image 60
Sharp VL-NZ100S manual Recording from an External Source, Advanced Features Playback, To Record from an External Source