Sharp VL-NZ100S manual Volume Control, Still, Video Search

Volume Control

Available mode:

TAPE-VCR

When the camcorder is in TAPE-VCR mode, push the Volume control to the L or + side to increase (1) or decrease (2) the volume.

The volume level indicator will appear on the LCD screen during adjustment only. Once the Volume control is released, the volume level indicator will disappear shortly afterwards.

Volume control

VOL UME

Decrease Increase

Speaker

Still

Available mode:

TAPE-VCR

The still function allows you to pause playback in TAPE-VCR mode.

During playback in TAPE-VCR mode, press m on the Operation button.

To return to normal playback, press m again.

Notes:

•The sound is off in Still mode.

•To protect the tape, the camcorder automatically returns to normal playback if it is left in Still mode for more than 5 minutes.

Video Search

Available mode:

TAPE-VCR

The video search function makes it easy to search for a desired scene on the tape.

Searching for a Scene Near the Current Tape Position

1 During playback in TAPE-VCR mode, press k (or j) on the Operation button.

• The playback picture fast forwards (or

reverses).Basic

Operations 2 When you find the scene, press m to

return to normal playback.

Searching for a Scene Far from the Current Tape Position

1 During fast forward (or rewind) in TAPE- VCR mode, press and hold k (or j) on the Operation button.

•The fast forward (or rewind) picture displays.

2 If the scene is still rather far from the current tape position, release the Operation button to normal fast forward (or rewind).

3 Repeat steps 1 and 2 above until you find the scene.

4 Press m to begin normal playback.

Notes:

•The sound is off during search.

•You may experience picture noise during search. This is not a malfunction.

24

VL-NZ100H-019-025 24 02.2.14, 9:59 AM