Gamma Playback

Available mode:

TAPE-VCR

The gamma playback function improves the playback picture in TAPE-VCR mode by increasing the brightness of the subject while leaving the brighter portions of the image unaffected.

GAMMA/BRIGHTER button

During playback in TAPE-VCR mode, press the GAMMA/BRIGHTER button once.

“GAMMA1” appears, and the picture becomes brighter.

GAMMA 1

A UD I O 1 + 2

To obtain a brighter picture, press the GAMMA/ BRIGHTER button again.

• “GAMMA2” appears.

GAMMA 2

A UD I O 1 + 2

Copying an Image from Tape to Card

Available mode:

TAPE-VCR

You can capture your favourite image frame from a video tape recording and save it on card.

1 Insert the recorded Mini DV cassette and a card in the camcorder.

2 Set the camcorder to TAPE-VCR mode, then begin tape playback.

3 Press m on the Operation button at the point where the desired image appears.

• A still picture of the image is displayed.

A UD I O 1 + 2

Note:

• To cancel the still picture, press m again.

4 Press the STILL button to copy the image to the card.

The S indicator flashes red while the image is copied.

CARD

A UD I O 1 + 2

Useful Features

To cancel Gamma Playback

Press the GAMMA/BRIGHTER button until “GAMMA1” and “GAMMA2” disappear.

Note:

Gamma Playback has no effect during still playback.

40

VL-NZ100H-038-041

40

02.2.14, 10:01 AM

Page 51
Image 51
Sharp VL-NZ100S manual Copying an Image from Tape to Card, To cancel Gamma Playback