Sharp VL-NZ100S Picture/Backlight Adjustments, Adjusting the Picture, Adjusting the Backlight

Appendix

Picture/Backlight

Adjustments

Available modes:

All modes

If the picture is difficult to see due to ambient light or other factors, adjust the monitor picture settings.

•The example screens shown are for TAPE- CAMERA mode.

Adjusting the Picture

1 Press the MENU button until the menu screen appears.

2 Press l or m on the operation button to select O, then press the SET button.

L C D S E T

B A C K L I G H T A U T O

L C D B R I G H T

L C D C O L O U R

R E T U RN

3 Press l or m to select “LCD BRIGHT” or “LCD COLOUR”, then press the SET button.

4 Press l or m to adjust the item to the desired setting.

LCD BR I GHT

DarkerBrighter

LCD COL OUR

DecreaseIncrease

5 Press the SET button, then press the MENU button to turn off the menu screen.

Note:

•When adjusting the colour, the picture on the LCD monitor may differ from the picture actually recorded. Do not change the colour setting unless necessary. (This adjustment only affects the monitor picture, not the recorded image.)

Adjusting the Backlight

1 Press the MENU button until the menu screen appears.

2 Press l or m on the operation button to select O, then press the SET button.

3 Press l or m to select “BACKLIGHT”, then press the SET button.

L C D S E T

B A C K L I G H T A U T O

L C D	B R I G H T	N O RMA L
L C D	C O L O U R B R I G H T
R E T U RN		O F F

4 Press l or m to select “AUTO”, “NORMAL”, “BRIGHT” or “OFF”, then press the SET button.

B ACKL I GHT BR I GH T

AUTO: The camcorder automatically switches between “NORMAL” and “BRIGHT” depending on the ambient light. This mode is only available in TAPE-CAMERA or CARD-CAMERA mode.

NORMAL: For use indoors or under moderate lighting conditions.

BRIGHT: For use outdoors under strong lighting conditions, such as bright daylight.

OFF: The backlight turns off. To turn it

on again, press the MENU button.

5 Press the MENU button to turn off the menu screen.

Appendix

68

VL-NZ100H-068-073 68 02.2.14, 10:04 AM