Sharp VL-NZ100S manual Still Recording on Tape, Attaching the Supplied Tripod Adapter

Useful Features Camera Recording

Useful Features

Still Recording on Tape

Available mode:

TAPE-CAMERA

You can record continuous still images of subjects.

1 Set the camcorder to TAPE-CAMERA mode.

2 In Recording Standby mode, press the STILL button fully.

•A still image of the subject is displayed.

3 Press the REC START/ STOP button.

• The still image of the subject will be recorded.

To pause recording

Press the REC START/STOP button.

To cancel the still image

Press the STILL button fully.

Notes:

•Still Recording can also be used during recording by pressing the STILL button fully.

•The picture quality in Still Recording function will be slightly lower than normal pictures.

Attaching the Supplied Tripod Adapter

Attach the supplied tripod adapter when using a tripod with the camcorder.

1 Align the tripod adapter with the tripod adapter socket on the bottom of the camcorder, then rotate as shown below.

Tripod adapter socket

Tripod socket

2 Attach tripod to tripod socket.

Note:

• You cannot use the supplied tripod adapter, if the alignment pin is not retractable.

33

VL-NZ100H-031-037 33 02.2.14, 10:00 AM