Sharp VL-NZ100S manual Powering the Camcorder from an AC Outlet, Preparation

Preparation

Preparation

Powering the Camcorder from an AC Outlet

You can also power the camcorder from a power outlet by using the supplied AC adapter.

Caution:

•The supplied AC adapter is specially designed for use with this camcorder, and should not be used as a power supply for other camcorders.

1 Make sure that the Power switch is set to OFF.

2 Connect the supplied power cord to the AC power socket on the AC adapter, and insert the AC plug into a power outlet.

Note:

•When using the AC adapter to power the camcorder, the battery pack is not charged.

Cautions:

•BEFORE REMOVING THE DC PLUG, ALWAYS STOP RECORDING OR PLAYBACK AND TURN THE POWER OFF. Removing the DC plug while shooting or during playback may damage the tape by causing it to wrap around the video head drum or destroy the card, rendering it unreadble and unwritable.

•Disconnect the camcorder from the AC adapter if you will not use the camcorder for a long period of time.

AC power socket

To power outlet

3 Insert the DC plug into the DC input jack.

• The camcorder is supplied power.

DC input jack

4 Hold down the Lock button and set the Power switch to CAMERA or VCR.

11

Lock button

VL-NZ100H-009-018 11 02.2.14, 9:58 AM