Sharp VL-NZ100S Setting the Date and Time, 1, 3, 4, 5, 6, 7, 8, 9

Preparation
Preparation
15
Setting the Date and
Time
Available modes:
TAPE-CAMERA, CARD-CAMERA
Example: Setting the date to 2 June 2003 (2. 6.
2003) and the time to 10:30 am (10:30).
Note:
•Before performing the steps below, make sure
that the lithium battery has been installed (see
page 14).
SET button
1Hold down the Lock button
and set the Power switch to
CAMERA.
2Press the MENU button until the menu
screen appears.
3Press the SET button.
CLOCK SET
DISPLAY
SETTING
12H 24H/
RETURN
120
000:
02.1.
Lock button
4Press l or m to select “2” (day), then
press the SET button.
5Press l or m to select “6” (month),
then press the SET button.
6Press l or m to select “2003” (year),
then press the SET button.
7Press l or m to select “10” (hour), then
press the SET button.
8Press l or m to select “30” (minute),
then press the SET button.
• The internal clock now starts operating.
9Press the MENU button to turn off the
menu screen.
Note:
•If the date and time have been set, the SETTING
1 screen (T) appears in step 2. Select
“SETTING” in the CLOCK SET screen (P) using
the Operation button and SET button.
000
:12002.2.
SETT I NG
000
:62002.2.
SETT I NG
000
:
SETT I NG 6 2003.2.
10 00
:
SETT I NG 6 2003.2.
10 30
:
SETT I NG 6 2003.2.
Power switch
MENU button
Operation button
VL-NZ100H-009-018 02.2.14, 9:58 AM15