Windows ME

1 “Add New Hardware Wizard” appears after performing “Preparation”.

2 Select “Automatic search for a better driver”.

3 Insert the CD-ROM containing the USB driver into the CD-ROM drive, then click “Next”.

4 Select “SHARP DVC USB Ver. 1.0” located in the “WINME” folder of the CD-ROM drive, then click “OK” to begin installation.

5 Click “Finish” to complete the installa- tion.

Windows XP

For installing the USB driver, you need to log in as the system administrator.

1 “Found New Hardware Wizard” appears

Image Folders and File Names

Still images recorded using the camcorder are stored on a card as shown below.

DCIM • • • • • • Folder of still image files

100SHARP Sub-folder of still images

Serial number (100 to 999)

DVC00001.JPG Still image

DVC00002.JPG

Caution on transferring data

While transferring data, the transfer indicator moves. Do not execute the operations below.

after performing “Preparation”.

2 Select “Install from a list or specific location”.

3 Insert the CD-ROM containing the USB driver into the CD-ROM drive, then click “Next”.

4 Select “Search for the best driver in these locations.” and “Include this location in the search:”.

5 Specify “R:\WIN2KXP”, then click “Next”.

6 A warning window for hardware

Disconnecting the USB cable

Switching the power on/off

Turning off the PC or setting it to Standby

Opening the card slot cover

U S B

Transfer indicator

Note:

In case of data transfer error, disconnect the USB cable, then connect it again, or set the Power switch to OFF, then set it to VCR again.

Disconnecting the USB cable

Digital

installation appears. However, click “Continue Anyway” to continue installation.

7 Click “Finish” to complete the installa-

Refer to the operation manual and help files of your PC for unplugging, and make sure that the PC permits to unplug, then disconnect the USB cable.

FeaturesStill Camera

tion.

Notes:

If you copy any data incompatible with this camcorder to the card, the camcorder will not be able to recognize it.

It is recommended to use the AC adapter as a power source for extended periods of use.

66

VL-NZ100H-059-067

66

02.2.14, 10:04 AM

Page 77
Image 77
Sharp VL-NZ100S manual Image Folders and File Names, Disconnecting the USB cable, Windows ME, Windows XP