Philips DVP3007 user manual Digital Audio Setup, Digital Output, Lpcm Output

Audio Setup Menu

1 In disc mode, press SYSTEM MENU.

2 Press 1 2 to select ‘Audio Setup’ icon.

3 Press OK to confirm.

- - Audio Setup Page - -

Analog Output Digital Audio Setup Sound Mode

CD Upsampling Night Mode

Go to Audio Setup Page

Analog Output

Set Analogue Output to match your DVD Player’s playback capability.

1 In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {ANALOG OUTPUT}, then press 2.

Stereo

Select this option when output delivers sound from only the two front speakers.

LT/RT

Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

V SURR

Allows the DVD player to use virtual surround sound effects.

Multichannel

Select this to enable Multi-channel output.

2 Press 3 4 to select a setting, then press OK to confirm your selection.

DVD Setup Menu Options

English

TIPS:

26

DVP3007_94(eng)

Digital Audio Setup

The options included in Digital Audio

Setup are: ‘Digital Output’ and ‘LPCM

Output’.

1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {DIGITAL AUDIO SETUP}, then

press 2.

2Press the 3 4 keys to highlight an option.

3Enter its submenu by pressing 2.

4Press 3 4 to select a setting, then press OK to confirm your selection.

Digital Output

Set the Digital output according to your optional audio equipment connection.

➜Off:Turn off the digital output.

➜All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.

➜PCM Only: Only if your receiver is not capable of decoding multi-channel audio.

Helpful Hints:

–If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.

LPCM Output

If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.

➜48kHz: Playback a disc recorded at the sampling rate of 48kHz.

➜96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic (Flat) mode.

Helpful Hint:

–LPCM Output can be selected only when PCM Only is activated.

To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.

26 4/26/05, 11:05 AM