Note
[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].
The higher the sampling rate, the better the sound quality.
[Volume]
Set the default volume level when you play a disc.
1.Press OK.
2.Press 
to set the volume.
3.Press OKWRFRQÀUPDQGH[LW
[Sound Mode]
Select a preset sound effect to enhance the audio output.
[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.
[Movie Mode] - Select a sound effect for movies.
[Music Mode] - Select a sound effect for music.
[Night Mode]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
[On] - Enjoy quiet viewing at night.
[Off] - Enjoy surround sound with a full dynamic range.
Note
Applicable only to Dolby Digital encoded DVD.
Video setup
1Press SETUP.
» [General Setup] menu is displayed.
2Press 
to select [Video Setup], then press 
.
3Select an option, then press OK.
4Select a setting, then press OK.
To return to the previous menu, press 
. To exit the menu, press SETUP.
[TV System]
Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.
[PAL] - For
[Multi] - For TV that is compatible with both PAL and NTSC.
[NTSC] - For
[TV Display]
Select a display format:
[4:3 Pan Scan] - For 4:3 screen TV:
[4:3 Letter Box] - For 4:3 screen TV: wide- screen display with black bars on the top and bottom of the screen.
[16:9] - For
[Progressive]
If a progressive scan TV is connected to this product, turn on the progressive scan mode. [On] - Turn on progressive scan.
[Off] - Turn off progressive scan mode.
Note
For more detailed description, see “Get started” > “Turn on progressive scan”.
[Picture Setting]
6HOHFWDSUHGHÀQHGVHWRISLFWXUHFRORUVHWWLQJVRU customize the personal setting.
[Standard] - Original color setting. [Bright] - Vibrant color setting.
[Soft] - Warm color setting.
[Personal] - Customize the color setting. Set the level of brightness, contrast, tint and color saturation, then press OK.
English
EN 13
