4 Get started
General Setup
Prepare the remote control
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
English |
Melayu |
1 Open the battery compartment.
2 Insert two R03 or AAA batteries with
correct polarity
3 Close the battery compartment.
Caution
•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
Find the correct viewing channel
1 Press 
to turn on this product.
2 Turn on the TV and switch to the correct
Select menu display language
1 Press SETUP.
»[General Setup] menu is displayed. 2 Select [OSD language], then press
.
10EN
•The language options may vary from different regions.
3 Press 
to select a language, then press OK.
Turn on progressive scan
Note
•To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 1: Connect to the component video jacks” for details).
Video Setup
| TV System |
|
|
|
|
|
|
|
|
| On |
| |
| TV Display |
|
|
| Off |
|
| Progressive |
|
|
|
|
|
| Picture Setting |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Turn on the TV to the correct viewing channel for this product.
2 Press SETUP.
3 Press 
to select [Video Setup].
4 Select [Progressive] > [On], then press OK.
