Philips DVP3258/96 Analog Output, Lt/Rt, Stereo, Surr, Multi Channel, Digital Output Spdif Off

Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Analog Output	This setting is only required if you have connected the audio
	output of this unit to a stereo device, multi channel audio system
	or TV using the analog output jack.
	{ LT/RT }	– The connected device has a built-in
		Dolby Pro Logic decoder. It can deliver
		the surround sound through the two
	{ Stereo }	speakers.
		– The connected device can only output
	{ V SURR }	stereo audio through two speakers.
		– For virtual surround sound effects.
	{ Multi Channel }	– Enable multi-channel output.

English

Digital Audio Setup This setting is only required if you have connected the audio output of this unit to an amplifier/receiver using the digital

output jack.

{ Digital Output }	–	{ SPDIF Off }
		Disable digital audio output. Select this
		if you are using the analog audio jacks
		to connect this unit to a TV or Stereo
		system.
		{ ALL }
		The connected device supports multi-
		channel audio formats. The digital audio
		format will be output as on disc.
		{ PCM Only }
		The connected device does not support
		multi-channel formats. All audio signals
		are downmixed to PCM format
		(2-channel).
{ LPCM Output }	–	{ 48 K }
		Select this to play disc recorded at
		sampling rate of 48 kHz.
		{ 96 K }
		Enable 96 kHz output on digital audio if
		the amplifier/receiver is compatible
		with high sampling rate audio (88.2 / 96
		kHz). However, if the sound output is
		distorted or there is no sound, change
		the setting to ‘48 K’.

Note: LPCM Output can only be selected when { PCM Only } is activated. The higher the sampling rate, the better the sound quality.

35

dvp3258_96_eng.indd 35 2008-03-18 8:55:49 AM