Philips DVP3320/77, DVP3320/55, DVP3320K Select menu display language, Turn on Progressive Scan

Tip

•The video-in channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO, HDMI etc.. See the TV user manual on how to select the correct input on your TV.

•If the audio output of this DVD player is routed to other audio device (such as audio system or receiver), turn on the audio device to the appropriate audio input channel. Refer to the device user manual for details.

Select menu display language

General Setup

OSD Language	English
Auto Standby	Español
	Português

1Press SETUP.

» [General Setup] menu is displayed.

2Select [OSD language], then press .

•The language options are different depending on your country or region. It may not correspond to the illustration shown here.

3Press to select a language, then press OK.

Tip

•You can set the default language for DVD audio and disc menu, see chapter ‘Adjust settings’ - [Preferences] for details.

12EN

Turn on Progressive Scan

Connect a progressive scanTV with component video jacks (see chapter ‘Connect video cables

-Option 1: Connect to component video jacks’ for details).

Video Setup

TV System	Interlaced
TV Display	P-Scan
Picture Setting
Component Video
Closed Caption

1Turn on the TV to the correct viewing channel for this DVD player.

2Press SETUP.

3Pressto select [Video Setup].

4Select [Component Video] > [P-Scan],

then press OK.

» A warning message is displayed.

5To proceed, select [Yes] and press OK. » The progressive setup is complete.

Note

•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.

•If no picture displayed, turn off the progressive scan mode as follows: 1) Press to open the disc compartment. 2) Press the Numeric button ‘1’.

6Press SETUP to exit the menu.

7You can now turn on the progressive scan mode on the TV (see the TV user manual).

GYSBHQLQGG6HF