[Digital Output]
Selects the setting based on the digital ampli er/receiver that is connected through the digital jack.
•[Off] - Disables digital output.
•[PCM] - Downmixs to PCM format (2 channel).
•[All] - Supports
[Volume]
Sets the default volume level when you play a disc.
1. Press OK.
2. Press 
to set the volume.
3. Press OK to con rm and exit.
[Down Sampling]
Selects the output sampling rate for better sound quality.
•[On] - for discs recorded at sampling rate of 48 kHz.
•[Off] - for discs recorded at sampling rate of 96 kHz.
[Night Mode]
Makes loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
•[On] – Enjoys quiet viewing at night.
•[Off] – Enjoys surround sound with a full dynamic range.
Note
•Applicable only to Dolby Digital encoded DVD.
Video setup
| Video Setup |
|
| English |
|
|
|
| |
|
|
|
|
|
| TV System |
|
|
|
| TV Display |
|
|
|
| Picture Setting |
|
| settings |
| Closed Caption |
|
| |
| Component Video |
|
|
|
|
|
|
| Adjust |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
1Press SETUP.
» [General Setup] menu is displayed.
2 Press
to select [Video Setup], then press 
.
3Select an option, then press OK.
4Select a setting, then press OK.
•To return to the previous menu, press 
.
•To exit the menu, press SETUP.
Note
•See the explanations of the above options in the following pages.
[TV System]
Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.
•[NTSC] – For
•[PAL] – For
•[Multi]– For TV that is compatible with both PAL and NTSC.
Con rm the setting by pressing | to select |
[Yes], then press OK. |
|
[TV Display]
Selects one of the following display formats:
EN 21
GYSBHQLQGG6HF
