Panasonic DMC-F1PP manual Setting the Date/Time Clock Set, 4,5, Simple mode, skip this step

KC42-PP.book 24 ページ ２００２年１２月１９日 木曜日 午後４時３６分

Preparation

Setting the Date/Time (Clock Set)

7

1,6 2,3,4,5

3

REC SETUP 2/2

NO.RESET

RESET

CLOCK SET

LANGUAGE ENG

SELECT SET EXIT MENU

If the message [PLEASE SET THE CLOCK] appears, set the date and time.

You can go to the setup menu by pressing the [MENU] button while the message is displayed.

You can set the year from 2002 to 2099. The 24-hour system is used.

1Press the [MENU] button.

2Press 1 to make the setup menu appear.

•In simple mode, skip this step.

3Press 3/4 to select [CLOCK SET], and then press 1.

4Press 3/4/2/1 to set date and time, and then press 1.

5Press 3/4 to select [M/D/Y], [D/M/Y] or [Y/M/D].

6Press the [MENU] button twice.

•The menu will disappear.

7Check if the date/time setting is displayed correctly, after turning the camera [OFF] and [ON].

4,5

CLOCK SET

10:00 JAN . 1 . 2003

M/D/Y

SELECT SET EXIT MENU

•After a fully charged battery is installed in the camera for at least one hour, the time and date will be held for approximately 24 hours if the battery is removed. If the battery was not fully charged the time may not be retained properly. If the time/date setting is lost please reset it.

24