Panasonic DMC-F1PP manual Setting up the Power Save Mode

KC42-PP.book 73 ページ ２００２年１２月１９日 木曜日 午後４時３６分

Technical use

Setting up the Power Save Mode

In this mode, if the camera is not operated for a certain amount of time, it is automatically turned off.

1,5 2,3,4

3,4

	REC			SETUP 1/2
MONITOR
AUTO REVIEW
BEEP				1
POWER SAVE
		2 MIN.	5	MIN. 10 MIN.

SELECT SET EXIT MENU

1Press the [MENU] button.

2Press 1 to open the setup menu.

3Press 3/4 to select [POWER SAVE].

4Press 2/1 to choose the setting time.

•[2 MIN.]

•[5 MIN.]

•[10 MIN.]

•[OFF]: The power is not turned off automatically.

5Press the [MENU] button.

•The menu will disappear.

•If you want to cancel the power save mode, turn the power switch to [ON] again after turning it to [OFF], or press the shutter button.

•When using the AC adaptor/connecting to a PC/recording the motion image/playing back the motion image/during slide show, the power save mode is not available.

•In simple mode [ ], the power save is fixed to [2 MIN.].

•In recording mode, when keeping the [DISPLAY] button pressed for 2 seconds, power save mode starts.

73