KC42-PP.book 14 ページ 2002年12月19日 木曜日 午後4時36分

Preparation

Connecting to an Electrical Outlet

If you use an AC adaptor as indicated in 3, you can use the camera without worrying about battery discharge.

 

[Preparation]

 

• Check that the power switch is set to [OFF]

1

and the lens is stored.

 

1Connect the AC cable.

2 Open the DC IN terminal door 1.

3

• It is also possible to connect the DC cable to the camera with the Memory Card/battery door opened.

3 Connect the DC cable (supplied) to the camera.

• The camera becomes warm during use. However, this is not a malfunction.

• Disconnect the AC adaptor and DC cable when camera is not in use.

• The battery cannot be charged in the camera with the AC adaptor connected.

• Use the supplied DC cable.

2

14

Page 14
Image 14
Panasonic DMC-F1PP Connecting to an Electrical Outlet, Lens is stored, Connect the AC cable Open the DC in terminal door