Panasonic DMC-F1PP manual Turning Power on/off, Lighting, Blinking, Set the power switch to on

KC42-PP.book 17 ページ ２００２年１２月１９日 木曜日 午後４時３６分

Preparation

Turning Power on/off

1Set the power switch to [ON].

1,2	• The Status indicator 1 lights.
2	Set the power switch to [OFF].
OFF ON

•When the power switch is turned on, do not hold the lens cover. If the lens cover does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.

•When turning the power switch off, do not hold the lens cover. If the lens cover does not close, the power turns off with it opened. Turn the power switch on and off.

•When turning on the power in the recording mode, do not put any obstacle in front of the lens.

ªStatus Indicator A

Lighting:

•When turning the power switch to [ON].

Blinking:

• While the focus is being adjusted or the focus is not properly adjusted.

• When the card is not inserted.

• When no space is left on the card.

• When the remaining battery power is low. (blink slowly)

ªFlash/Access Indicator B

Lighting:

•When accessing the card.

•When the flash fires. (It lights when the shutter is pressed halfway)

•When sending data to PC.

Blinking:

• When charging the flash.

• When setting the flash mode to forced off and recording in dark places (blink slowly.)

17