Inserting the Card, Inserting the card | Panasonic DMC-F1PP manual

KC42-PP.book 15 ページ２００２年１２月１９日木曜日午後４時３６分

Preparation

Inserting the Card

[Preparation]

1,4

2

LOCK

1

3,7

4

5,6

•Check that the power switch is set to [OFF] and the lens is stored.

[Inserting the card]

1Slide the door in the direction of the arrow to open the Memory Card/battery door.

2Insert the card all the way in until it clicks.

•Check the direction of the card.

•Do not touch the connection terminals on the back side of the card.

3Close the Memory Card/battery door.

[Removing the card]

4Slide the door to the direction of the arrow to open the Memory Card/battery door.

5Press the card to release.

6Pull the card out.

7Close the Memory Card/battery door.

•If you are using a MultiMediaCard type memory card and the battery card cannot close, the card may be installed backwards. Remove the card and reverse it, then try to close the door again.

•If the card cannot be fully inserted, verify whether the direction of the card is correct.

•We recommend that you use a Panasonic branded SD Memory Card. (Use only the genuine card)

•If the card is not fully inserted, the card may be damaged.

15

Image 15

Panasonic DMC-F1PP manual Inserting the Card, Inserting the card, Removing the card

Contents

Operating Instructions Dear Customer Information for Your Safety FCC Note U.S. only Contents Others Standard Accessories Names of the Components 14 15 1621 22 23 24 Left View Right ViewBottom View Recording LCD Monitor Display Recorded date and time Recording in Simple modePlayback 4qa6q/10a15cm Preparation Quick Guide Connect the AC cable Charging the BatteryAttach the battery to the AC adaptor When the Charge indicator B Door Inserting the BatteryInserting the battery Removing the battery Battery indicator Connect the DC cable supplied to the camera Connecting to an Electrical OutletLens is stored Connect the AC cable Open the DC in terminal door Inserting the Card Inserting the cardRemoving the card SD Memory Card MultiMediaCardSlower than SD cards Blinking Turning Power on/offSet the power switch to on Lighting Attaching the Strap Using the LCD Monitor Parallax compensation mark Using the Optical Viewfinder Shutter Button Pressing halfway/Pressing fully Mode Dial Operating the Menu Press the Menu buttonMenu will disappear Simple mode, skip this step Setting the Date/Time Clock SetPress the Menu button Press 1 to make the setup menu appear 4,5 Preparation Set the power switch to ON. P17By only pressing the shutter button, Will be taken About shutter jiggle Press the Menu button Take a picture Taking Pictures in Simple ModeAuto Review P71 Beep P72 Clock SET P24 Press 2/1 to select ENLARGE, 4qa6q/10a15cm, Internet After taking a picture, press the 4/REVIEW/SET button Picture is erased Once erased, pictures cannot be recoveredMotion image mode , Review cannot be used Checking the Captured Picture Review Recording starts Recording Motion ImagesCenter the subject on the LCD Halfway Using the Optical Zoom 2,3 Using the Digital Zoom Every time you press , the available Taking Pictures using the Built-in FlashPreparation Set the mode dial except for / / . P22 Press Tripod Simultaneously it reduces the red-eye Press 2/ 1 to select on Using the Continuous AF Taking Pictures with the Self-timer Press the buttonPress the shutter button fully Taking Pictures with Audio Press the shutter button fully and take a pictureIt is not necessary to continue pressing the shutter button Changing the Picture Size Changing the Quality Data Compression Ratio Normal recording Taking Pictures using Macro ModeMacro Mode Set the mode dial to Macro mode Take a picture Set the mode dial to Portrait mode Take a picture Taking Pictures using Portrait Mode Taking Pictures using Landscape Mode Distances exceeding 32.8 feet 10 mTaking Pictures. P25 Set the mode dial to Night portrait Mode Take a picture Taking Pictures using Night Portrait Mode Picture becomes bluish Taking Pictures using Color Effect Mode Center the subject in the spot AF area Take a picture Taking Pictures using Spot Mode Compensating the Exposure Press the button Press 2/1 to compensate the exposureYou can compensate from -2 EV to +2 EV with 1/3 EV step Taking Pictures using Auto Exposure AE Bracket When the focus is adjusted, the focus indication 1 ¥ appears Using the AF/AE Lock Picture Adjustment Natural/Standard/Vivid Auto Setting the White Balance Only when setting the white balance again 2,3,4White balance is set Setting ISO Sensitivity Preparation Set the mode dial except for / . P22 Taking Pictures using Burst Mode Playing Back Still Pictures Fast forwarding/Fast rewindingLast recorded picture is played back You can hear audio from the speaker Playing Back Still Pictures with Audio Images Multi Playback During playback, press the zoom W buttonPress 3/4/2/1 to select images During playback, press the zoom T button Using the Playback Zoom To pause Playing Back Motion Images Selected image is deleted Deleting Images3,4 Delete single image It is possible to delete up to 50 images all at once Once deleted, images cannot be recoveredDelete multi images Delete all images 2,3,4,5 Writing the Print Information to the Card Dpof SettingSingle copy setting To cancel Multi copy setting Displayed Press 2/1 to select SET, Cancel or no To cancel all settingsIndex setting/to cancel All Dpof settings are cancelled Single setting/to cancel Multi setting/to cancel, To cancel all settingsProtecting Images on the Card Press 3/4 to select ALL/DPOF and then press Press 3/4/2/1 for setting belowPlaying Back with Slide Show Automatic Playback 3,4,5,6 KC42-PP.book 65 ページ２００２年１２月１９日木曜日午後４時３６分 Press the 4/REVIEW/SET button, to stop audio recording Adding Audio to Recorded Pictures Audio Dubbing Resizing Recorded Pictures 2,3,4,5,6,71600 a 1280 a 640 a Remaining parts of the picture Trimming Recorded Pictures2,3,5,7,8 Picture trimming, and enlarge Card is formatted Formatting the Card Adjusting the LCD Monitor Brightness Using the Auto Review Press the Menu button Press 1 to open the setup menu Setting up the Operational Sound/Shutter Sound MIN 10 MIN OFF The power is not turned off automatically Setting up the Power Save Mode Resetting the File Number Initializing the settings Clock setting is not resetPress the 4/REVIEW/SET button to set Read the TV operating instructions too Playing Back Images with a TV MonitorYellow to the video in socket White to the audio in socket Image is displayed on the television Connecting to a PC Preparation If your PC uses Microsoft Windows 98 orSuch as Windows ME, Windows 2000, or USB DIRECT-PRINT Press 2/1 to select the picture to be When Dpof is not set, this screen is skippedUSB DIRECT-PRINT Single Picture Preparation Connect the camera to a printer. P78 Press 2/1 to select Dpof USB DIRECT-PRINT Dpof After Use REC mode menu 14 NO.RESET P74 Reset P75 Clock SET P24Menu Items Playback mode menu Simple mode menu Digital camera is not intended for business use Always keep the terminals of the battery clean Optimal Use of the BatteryBe sure to detach the battery after use Dispose of an unusable battery Battery Condensation Card When condensation has takenSet the power switch to OFF Ambient temperature, the fog SD Slide Show LCD Monitor Folder Composition Insert the Memory Card Cancel the Memory Card lock Selected picturesFailed access to Memory Card. Insert the card again Data reading error Play it back again Troubleshooting Pixels field of view ratio 100% Information for your safetyDigital Camera Card. MultiMediaCard performance will be less Panasonic CGA-S001A AC adaptor Panasonic DE-929A Accessory# Description Digital Camera Accessory System For USA Customers Digital Camera Accessory Order Form Request for Service Notice Limited Warranty Coverage Limited Warranty For USA Only Carry-In or Mail-In Service Accessory Purchases Customer Services Directory For USA Only LCD Monitor Brightness IndexAF/AE Lock Auto Review Grabación Spanish Quick Use Guide/Guía española para el uso rápido10 9 Preparaciones VQT0B81 F1202Ma0