Philips DVP3345VB manuel dutilisation Display cont’d, Progressive Scan, Default setting is Auto

Before proceeding...

Make sure your TV has progressive scan.

Connect with component video cable.

Press ▲ or ▼ to select PROG. SCAN, then press OK repeatedly to turn PROG. SCAN ON or OFF. Choose ON if your TV has Progressive Scan and if the TV is connected to the player’s COMPONENT VIDEO OUT jacks. Choose OFF otherwise.

The default setting is OFF.

Press SETUP to remove the menu.

Follow the steps 1-4 in the Display setup on page 51.

English

52Display (cont’d)

●If you selected STILL MODE, press ▲ or ▼ to select a setting, then press OK. This determines the quality of an image in still mode. If you select FIELD, still images will be stabilized but coarse due to the small amount of data. If you select FRAME, the images will be highly defined due to the simultaneous output of two fields.

The default setting is AUTO.

OPEN/CLOSE

1 2 3

4 5 6

TRACKING

DISPLAY

STILL MODE

AUTO

FIELD

FRAME

6	STILL MODE
	Press SETUP to remove the menu.

7	8	9		6
		CLEAR	TITLE
+10	0
VCR		SETUP	DVD
			DISC
INPUT			MENU
		OK
REW		PLAY	FFW
STOP		PAUSE	BACK

Progressive Scan

You may adjust the Progressive Scan compatibility.

1

2

3 ● If PROG. SCAN is ON, this message appears :

NOTE If there is no picture or picture is distorted after selecting “YES” ,

Wait about 15 seconds for auto recovery.

Activate Progressive?		NO
		YES
SELECT	SET

Press ▲ or ▼ to make a selection, then press OK.

If you select NO, the menu disappears and

PROG. SCAN is OFF. If you select YES, this appears :

Confirm again to use progressive scan.

If Picture is good, Select “YES” .

NO

YES

SELECT SET

Confirm your setting, then press OK. The menu will disappear and the Progressive Scan function will be activated. If you do not press any buttons for 15 seconds, Progressive Scan will switch to OFF.

		OPEN/CLOSE
1	2	3
4	5	6
		TRACKING
7	8	9	3
	CLEAR TITLE
+10	0
VCR	SETUP	DVD

		DISC
INPUT		MENU
	OK		2-3
REW	PLAY	FFW
STOP	PAUSE	BACK

Helpful Hint

•You can set PROG. SCAN to OFF either in the DISPLAY Menu or by pressing and holding PLAY B (DVD) on the front of the player for more than 5 seconds.

•You can adjust Progressive Scan Setting in the QUICK SETUP Menu that appears when you first press SETUP. With QUICK SETUP selected, press OK. Press ▼ to select PROG. SCAN. Press OK to choose OFF or ON. Press SETUP to remove the menu.

EN - 52