[Analogue Output]: Select an audio format for sound output when this player is connected through the AUDIO OUT L/R connectors. [Digital Audio]: Select an audio format for sound output when this player is connected through the COAXIAL connector.
[Digital Output] - Select a type of digital output: [Off] - Disable digital output; [All] - Support
[LPCM Output]
output sampling rate.The higher the sampling rate, the better the sound quality. [LPCM Output] is enabled only when [PCM Only] is selected under [Digital Output].
[Volume]
[Sound Mode]: Select a preset sound effect.
[Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech).
Note
Night mode is only available for Dolby encoded DVD discs.
Preference (languages, parental control...)
1Press 
.
2Select [Setup] > [Preferences] to access the preference setup options.
[Audio]: Select an audio language for video.
[Subtitle]: Select a subtitle language for video.
[Disc Menu]: Select a menu language for a video disc.
[Parental Control]: Restrict access to discs that are encoded with
the restriction options:When the
to enter an input stage, press |
| OK |
|
| |
to select a digit and press | / | to |
change a digit position. |
|
|
[PBC]: Display or skip the content
[Password]: Set or change a password to play a restricted disc.
password or if you have forgotten your password
[DivX Subtitle]: Select a character set that supports the subtitle of your DivX video.
[Version Info]: Display the software version for this player.
[Default]: Reset all settings to the factory default, except for the settings for [Disc Lock], [Parental Control] and [Password].
Note
If your preferred language is not available for disc language, audio or subtitle, you can select [Other] from the menu options and input
12EN
