English
Playing Back an MD (Continued)
Programing the Track Playing Order
You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 3 again.
5 Press MD 
.
The tracks are played in the order you have programed. Program Play ends when all the programed tracks are played once (when Repeat Play is not activated).
To stop during play, press 7.
The program you have made is still stored in the memory.
1 Load an MD.
•If the current playing source is not “MD,” press MD 
, then 7 before going to the next step.
On the remote control ONLY:
2 Press PLAY/FM MODE repeatedly until “PROGRAM” appears on the display.
The PRGM indicator lights up on the display.
PRGM (program) indicator
MD | PRGM |
•Each time you press the button, play mode changes as follows:
MD PROGRAM |
|
|
|
| MD RANDOM |
(Program Play) |
|
|
|
| (Random Play) |
MD NORMAL |
|
|
| MD GROUP | |
(Normal Play) |
|
|
| (Group Play) | |
If a program has been stored in memory, the program is called up.
3 Press the number buttons to select the tracks.
Ex.: For track number 5, press 5. For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Last programmed
| track number | Step number |
MD | PRGM |
Total playing time
4 Repeat step 3 to program other tracks you want.
To exit from Program Play, before or after play, press PLAY/FM MODE repeatedly so that the unit enters another play mode (Random Play, Group Play, or Normal Play).
The PRGM indicator goes off.
•Turning off the unit or ejecting MD also cancels Program Play and changes the play mode to Normal Play. The program you have made will be erased.
To check the program contentsBefore playing, you can check the program contents by pressing ¢ or 4.
4DOWN 
¢UP
(On the remote control) | (On the unit) |
•¢: Shows the programed tracks in the programed order.
•4: Shows them in the reverse order.
To modify the program
On the remote control ONLY:
Before playing, you can erase the last programed track by pressing CANCEL.
Each time you press the button, the last programed track is erased from the program.
To add tracks in the program before playing, simply select the track numbers you want to add by following step 3 in Program Play.
To erase the entire program, press 0 (MD eject) on the unit to eject the MD.
•The program will be erased when you turn off the power, unplug the AC power cord or a power failure occurs.
•If you try to program a 33rd track
“MEMORY FULL” will appear on the display.
•If your entry is ignored
You are trying to program a track that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks).
•If the total playing time is 2 hours 30 minutes or more
The total playing time on the display will not be shown. “–
39
