Listening to External Equipment
English
Listening to External Equipment
You can listen to external equipment connected to the AUX jacks and OPTICAL DIGITAL IN terminal on the rear of the unit.
•First make sure that the external equipment is properly connected as follows (see also “Connecting Other Equipment” on page 9):
DO NOT connect other equipment while the power is on.
To OPTICAL DIGITAL | |||
IN terminal |
| To digital audio | |
|
|
| |
AUDIO |
| output | |
PCM | OPTICAL |
| |
| DIGITAL | External equipment | |
| IN | ||
|
| ||
PCM/ | DVD OPTICAL |
| |
STREAM | DIGITAL | To audio output | |
| OUT | ||
RIGHT | LEFT | To AUX jacks | |
1 On the remote control: | |||
Press FM/AM/AUX repeatedly until “AUX” (for AUX jacks) or “AUX- DIGITAL” (for OPTICAL DIGITAL IN terminal) appears on the display.
•Each time you press the button, the source changes as follows:
4 Adjust the volume level to your desired listening level.
5 Apply sound effects, if you wish.
• For how to apply sound effects, see pages 11 and 12.
To adjust the Audio Input Level
If the sound from the component connected to the AUX jacks is too loud or is not loud enough when changing from another source to “AUX,” you can change the audio input level through the AUX jacks (without changing the volume level).
On the remote control ONLY:
Press and hold SET for more than 2 seconds while the source is “AUX.”
•Each time you press and hold the button, the audio input level alternates between “LEVEL 1” and “LEVEL 2.”
LEVEL 1: Select this when the sound is too loud (initial setting).
LEVEL 2: Select this when the sound is not loud enough.
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
Each time you press the button, the information on the display alternates between the source indication and the clock indication.
FM 
AM
AUX
On the unit:
Press AUX.
• Each time you press the button, the source | AUX |
| |
alternates between “AUX” and | FM/AM |
on the display. |
|
2 Turn down the volume level to “VOLUME MIN.”
VOLUME +
–
(On the remote control) | (On the unit) |
3 Start playing the external equipment.
•For operation of the external equipment, refer to the manuals supplied with it.
44
