English
Recording on an MD (Continued)
On the remote control ONLY:
3 Press TR. MARK SELECT to select track mark entry mode.
•Each time you press the button, entry mode changes as follows:
MANUAL MARK 
TIME AUTO MARK
AUTO MARK 
MANUAL MARK* Separates tracks manually by adding track marks at the places where you want.
•Press SET to add a track mark while recording.
TIME AUTO MARK* The unit automatically separates and put a track mark every 5 minutes.
•By pressing SET, you can also enter a track mark manually.
AUTO MARK* The unit automatically separates and put a track mark if there is a silence of 3 seconds or more between tracks.
•By pressing SET, you can also enter a track mark manually.
•When recording from an external equipment (“AUX” or “AUX- DIGITAL”)
Recording starts automatically when the source sound comes into the unit, and stops automatically if no sound comes into the unit for about 30 seconds (Sound Synchronized Recording).
When no sound comes into the unit, “STANDBY” will flash on the display.
•When making a digital recording from an external equipment (“AUX- DIGITAL”)
You cannot make a digital recording from a
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
•Each time you press the button, the information on the display changes as follows:
Source indication
MD SP
REC
GROUP x 1
* See “About the track marks” on page 45 for details.
4 Press MD REC. | Remaining recording time | |
| ||
| The REC (MD recording) indicator starts flashing |
| |
| on the display. |
| MD SP |
|
| |
|
| REC |
MD | TAPE | GROUP x 1 |
REC | LP 2 |
|
GROUP x 1 |
| |
Ex.: When recording a tape using LP2 and Group recording.
When the source is “FM” or “AM,” recording starts.When the source is “TAPE,” playback and recording start— Synchronized Recording.
When the cassette player stops, recording also stops automatically.
When the source is “AUX” or
To stop recording, press 7.
“WRITING” flashes on the display.
MD track number MD group number*
MD SP
REC 
GROUP x 1
Clock indication
Ex.: When you record an FM broadcast.
* When group recording is not activated, “–
Important:
While “WRITING” is flashing on the display, do not give any shock to the unit. Otherwise, the MD might not be able to play back anymore.
49
