JVC UX-J99DVD manual Assigning Titles to an MD, Enter the unit into the title entry mode, English

Assigning Titles to an MD

You can assign a name to each MD, to each group and to each track using alphabetic characters (uppercase and lowercase), symbols and numerals. Once a title is assigned, it is displayed for your confirmation.

•You cannot edit titles composed of more than 61 characters.

To make the editing possible, slide to close the erasure prevention tab on the cartridge side surface. (See page 45 for details.)

About the number of characters entered for an MD

The total number of characters that you can enter for an MD is 1792. The maximum number that you can enter for a disc/track title is 61. (However, the actual number you can enter may be slightly less than the maximum numbers due to the MD limitations—see page 88.)

•A space can be counted as one character.

•When the stereo long-hour recording (LP2 or LP4, see page 46) method is used for recording, the maximum number you can enter for a track title is automatically reduced since “LP:” and a space are automatically added to the beginning of the track title. Consequently this reduces the total number of characters you can enter for an MD. Ex.: You can enter up to 10 characters for each track if an MD is

composed of 120 tracks recorded using the stereo long-hour recording method.

In the following example, the process is explained from the very first—that is, inserting a disc. If you have already started recording or playing, start from step 2.

•You can edit titles during playback (in Normal Play).

•To exit from the title entry screen any time during the process, press TITLE EDIT or GROUP TITLE EDIT repeatedly.

During Program Play or Random Play

You can edit the MD as long as the playback is stopped except during Program/Random Play.

English

1 Insert an MD you want to edit into the MD loading slot.

On the remote control ONLY:

2 Enter the unit into the title entry mode.

For the disc and track title:

Press TITLE EDIT.

•During stop mode:

Disc title entry screen appears on the display.

•During play mode:

Track title entry screen appears on the display.

For the group title:

Press GROUP TITLE EDIT.

Group title entry screen appears on the display.

•If the loaded MD has no group, you cannot go to the following steps.

3 For the disc and track title:

Press UP ¢ or DOWN 4 to change the title entry mode.

•Each time you press the button, the title entry mode changes as follows:

DISC TITLE? 1 TITLE?

3 TITLE?2 TITLE?

For the group title:

Press GROUP/TITLE >>I or GROUP/TITLE I<< to change the group entry mode.

•Each time you press the button, the title entry mode changes as follows:

GR 1 TITLE? GR 2 TITLE?

GR 3 TITLE?

4 Press SET to enter the unit into the selected title entry mode.

Character entry position

Character set

Ex.: When the disc has no title.

68