Disc/MD Messages, For Disc | JVC UX-J99DVD specification

English

Additional Information (Continued)

Output Signals through the DVD OPTICAL DIGITAL OUT Terminal

Output signals differ according to the “DIGITAL AUDIO OUTPUT” setting. (See page 79.)

	DIGITAL AUDIO
Playback disc	OUTPUT
Playback disc

DVD VIDEO

with 48 kHz, 16/20/24 bit Linear PCM with 96 kHz, Linear PCM

with Dolby Digital

with DTS Digital Surround

DVD AUDIO

with 48/96/192 kHz, 16/20/24 bit Linear PCM

with 44.1/88.2/176.4 kHz, 16/20/ 24 bit Linear PCM

with Dolby Digital

with DTS Digital Surround

SVCD, VCD, CD

CD with DTS Digital Surround MP3 disc

	Output Signals
STREAM/PCM	DOLBY DIGITAL/PCM		PCM ONLY
	48 kHz, 16 bit Linear PCM*
	48 kHz, 16 bit Linear PCM
Dolby Digital bitstream			48 kHz, 16 bit Linear PCM
DTS bitstream		48 kHz, 16 bit Linear PCM
	48 kHz, 16 bit Linear PCM*
	44.1 kHz, 16 bit Linear PCM*
Dolby Digital bitstream			48 kHz, 16 bit Linear PCM

DTS bitstream		48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream		48 kHz, 16 bit Linear PCM

* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DVD OPTICAL DIGITAL OUT terminal if the discs are not copy-protected.

•No signal is emitted through the DVD OPTICAL DIGITAL OUT terminal while playing an MP3 disc.

Disc/MD Messages

For Disc:

Message

CANNOT PLAY

NO AUDIO

LR ONLY

Signification

You are trying to play back an unplayable disc or a disc with scratches, etc.

You cannot hear any sound. (The disc you are trying to play back could be an illegal copy.)

You are trying to play back a disc contains multi-channel sound which down-mixing is prohibited on the disc, only signals of the front left and right channel are output.

Solution

Change the disc.

Consult with the dealer you purchased the disc from.

This is not a malfunction.

89

Image 92

JVC UX-J99DVD manual Disc/MD Messages, Output Signals through the DVD Optical Digital OUT Terminal, For Disc

Contents

UX-J99DVD Page Important for Laser Products About This Manual PrecautionsIntroduction Contents Remote Control Remote ControlLocation of the Buttons and Controls Become familiar with the buttons and controls on your unit Disc trays compartment-5-DVD changer Front PanelFront panel Group indicator Reverse mode indicatorDisplay window on the front panel Display window Connecting Antennas Getting StartedUnpacking Attach the FM antenna to the FM 75 Ω Coaxial terminal Connecting Speakers To connect an outdoor FM antennaAM antenna To connect an outdoor AM antenna To remove the speaker grilles Connecting a TVRelease your finger from the clamp Connecting Other Equipment Color system of TV Color system settingTo select the color system To connect analog audio equipment Basic and Common Operations Setting the ClockTurning On the Power and Starting Playback Adjusting the Volume Level To turn down the volume level temporarilyReinforcing the Bass Sound Press Fade Muting Adjusting the Tone Changing the Scanning ModeChanging the Display Brightness Press Dimmer while the unit is turned on Setting the AM Tuner Interval Spacing Listening to FM and AM Broadcasts Presetting Stations Tuning in to a Preset Station Playing Back Discs on the 5-DVD Changer Disc InformationPlayable disc types About copy protection Disc structure Playback Control function PBC-SVCD and VCD only Load discs into the 5-DVD changer Loading DiscsPlaying Back All the Discs-Continuous Play Press ¢ or 4 during playback Basic Disc OperationsPress GROUP/TITLE I or GROUP/TITLE I during playback Using the number buttons Press ¡ orPress ¢ or 4 repeatedly Press DISP/CHARA Playing Back by Using the Disc Menu When playing a DVDWhen playing a Svcd or VCD Press TOP Menu or Menu Programing the Track Playing Order Program Play Press the number buttons to select a disc trayProgram other tracks you want Press DVD To check the programed contents Playing at Random-Random PlayTo exit from Program Play To modify the program Repeating Playback-Repeat Play Prohibiting Disc Ejection-Disc LockPress Repeat To exit from Random Play Advanced Disc Operations About the On-screen BarPress on Screen Indication Meanings Available discs Operation through the On-screen Bar Press on Screen twicePress Enter On-screen guide icons To repeat a current title, group, chapter, or all tracks Press cursor ∞/5 repeatedly to select Repeat Play modeRepeating Playback Press cursor ∞/5 repeatedly to select A-B To repeat a desired portion-A-B RepeatLocating a desired position-Time Search While playing back a DVD Ex. When playing a DVD Audio Locating a desired chapter/trackTo correct a misentry Unit starts playback from the specified time Selecting the Audio Language Selecting the Subtitle LanguagePress Audio Press Audio repeatedly to select the desired audio language Selecting a View Angle Selecting Browsable Still Pictures recorded onPress Angle Press Angle repeatedly to select the desired view angle Press Virtual Surround Press Audio repeatedly to select the desired audio channelEx. ST 1 ST 2 L 1 R 1 L 2 R ST 1/ST Special Picture Playback Press 8 oncePress 8 repeatedly Press Slow 9 ¡ or Changing the VFP Setting Press cursor 3/2 repeatedly to select the VFP modeRepeat steps 2 to 4 to adjust other parameters Press VFP Playing Back a Bonus Group Select a bonus groupWhile the key number entry indication appears On the display On the TV screen Press ¢ / 4 repeatedly as many times as required MP3/JPEG Disc PlaybackPress DVD 8 or #¥8 DVD on the unit Operations through the MP3/JPEG Control Screens Press cursor ∞/5 repeatedly to select a groupPress DVD 3 or Enter Press Repeat during or before play Basic MD Operations Playing Back an MDPlaying Back the Entire MD Normal Play To go to another track directly using the number buttons While playing or pausingRecording length mode To change the information shown on the display To check the program contents Load an MDPress the number buttons to select the tracks Repeat to program other tracks you want Press GROUP/TITLE I or GROUP/TITLE I to select a group Playing Tracks in a Group-Group PlayLoad an MD including groups Press Title Search Press Repeat repeatedly during or before playEnter the characters to search for the track title MD Repeat ALL To prohibit MD ejection-MD Lock Playing Back a Tape Playing Back a TapePress REV.MODE Press Tape 2 Turn down the volume level to Volume MIN Listening to External EquipmentListening to External Equipment Press AUX Recording on an MD Before You Start Recording on an MDAbout the track marks To avoid erasing important recordings Press Group REC ON/OFF Setting MD Recording ModesPress LP Press CD REC Mode to select the recording mode When recording from a CD-R/RWRecording discs onto an MD Disc-MD Synchronized Recording Press REC Speed to select the recording speed you want To record a single track during play or pause Recording Other Sources onto an MDPrepare the source to record from Manual Mark Time Auto Mark Press TR. Mark Select to select track mark entry modeREC MD recording indicator starts flashing On the display Recording on a Tape Before You Start Recording on a TapeTo protect your recordings To keep the best recording and playback sound quality Recording onto a Tape Press Tape REC Press REV.MODE to select a reverse mode When recording a disc or an MDRecording Disc onto a Tape Disc-Tape Synchronized Recording To record from the desired track MD and tape Elapsed Recording indicators When recording on an MD and a tape at the same timeRecording Discs onto an MD and a Tape Disc Synchronized Recording Using MD Groups as a separate item How to make up GroupsEditing an MD Guidance-MD Group Functions 13 14 Introducing Group Editing FunctionsGroup When Cannot FORM! appears on the display in step Forming a Group-FORM GRInsert an MD you want to edit into the MD loading slot During playback When Cannot ENTRY! appears on the display in step Adding a Track to a Group-ENTRY GRPress UP ¢ or Down 4 to select the track Press GROUP/TITLE I or GROUP/TITLE I to select the group Ex. When track 18 is selected Dividing a Group-DIVIDE GR Joining Two Groups-JOIN GR When Cannot Join appears on the display in stepEx. When groups 7 and 8 are selected Moving a Group-MOVE GR Ex. When group 3 is selectedEx. When group 3 is moved to group Ungrouping Tracks-UNGROUP Dissolving All Groups-UNGR ALLInsert an MD you want to edit into the MD Loading slot Ex. When group 6 is selected Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Ex. When adjusting the point by Ex. When track 12 is selectedDividing a Track-DIVIDE Press UP ¢ or Down 4 to select the track you want to divide Ex. When tracks 2 and 3 are selected Joining Two Tracks-JOIN Press UP ¢ or Down 4 to select the track you want to move Ex. When track 3 is moved to trackMoving a Track-MOVE Erasing Tracks-ERASE Erasing All Tracks-ALL EraseYou can select up to 15 tracks Appears on the display Track marked with Will be erased Enter the unit into the title entry mode Press UP ¢ or Down 4 to change the title entry modeAssigning Titles to an MD Press Title Edit Press Cancel to exit from the title entry mode Enter charactersPress Enter to finish the current title entry Press 0 MD eject on the unit to eject To Change the Title You can assign titles during play or recordingYou can make a correction or change the title Make sure that the character you want to change is flashing Using the Timers Using Recording TimerSet the shut-off time Set the start time To turn off the Recording Timer after its setting is done To turn on the Recording Timer againSelect the device to record onto MD REC Tape REC Select the source to play back Using Daily TimerHow Daily Timer actually works Adjust the volume level Select the fade setting Using Sleep Timer Timer PriorityHow Sleep Timer actually works Press Sleep repeatedly Initial Setting Using Choice Menu Configuration of the choice menusIntroducing the Choice Menus Operation buttons Operating Procedure Press Enter to finish the settingPress Choice Press cursor 3/2 repeatedly to display the Picture menu Picture setting menu-PICTURE Language selection menu-LANGUAGE Other setting menu-OTHERS Dynamic Range Compression Remember your password or make a note of it Restricting the Access Level-Parental LockSetting Parental Lock Changing the Parental Lock setting When you enter wrong password three timesReleasing Parental Lock temporarily To return to Others menu Country/Area codes list for Parental Lock Changing the Preset Signal Codes Set the AUDIO-TV switch to TV Press and hold TVOperating Other Manufacturers’ TV Release TV Press TV to operate your TV Using AV Compu Link Control System Connection diagramAV Compu Link connection Available operations Glossary Maintenance Cleaning the unitGeneral Notes Handling discs Utoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3 Language Code List Scms Serial Copy Management System1st Generation MD limitations Output Signals through the DVD Optical Digital OUT Terminal CD with DTS Digital Surround MP3 disc Output SignalsDisc/MD Messages For Disc For MD X1 only Troubleshooting Symptom Supplied accessories Tuner SectionCassette deck Section General EN, CS Victor Company of JAPAN, Limited 1203AIMMDWJEM