JVC UX-J99DVD manual Basic and Common Operations Continued, Adjusting the Volume Level, English

English

Basic and Common Operations (Continued)

To turn off the unit automatically (Auto Standby)

Using Auto Standby, the unit automatically turns itself off (on standby) if no operation is done for about 3 minutes except when playing back and when FM or AM is selected as the source.

If an operation is done within this 3-minute period, Auto Standby is canceled temporarily even though no sound comes in.

•You can also turn off the unit automatically by using the Sleep Timer. (See page 75.)

•If “CANNOT LISTEN” appears on the display

During high-speed recording, you cannot listen to any source, and therefore, cannot adjust the volume level.

•For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume level before connecting or putting on the headphones.

On the remote control ONLY:

To activate Auto Standby, press A.STANDBY.

“A.STANDBY ON” and the AUTO STANDBY indicator appear on the display.

•When no sound comes in, the AUTO STANDBY indicator starts flashing on the display. About 5 seconds before the unit turns itself off (on standby), “AUTO STANDBY” starts flashing on the display.

AUTO STANDBY indicator

AUTO STANDBY

To deactivate Auto Standby, press A.STANDBY again.

“A.STANDBY OFF” appears on the display for a while and the AUTO STANDBY indicator goes off.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source. REMEMBER you cannot adjust the volume level while the unit is on standby (off).

To turn down the volume level temporarily

On the remote control ONLY:

Press FADE MUTING.

The volume level gradually decreases to “VOLUME MIN.”

To restore the sound, press FADE MUTING again.

•Pressing AUDIO VOL + or turning VOLUME + / – control clockwise (to +) on the front panel also restores the sound.

Adjusting the Volume Level

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOLUME MIN,” “VOLUME 1”– “VOLUME 40,” and “VOLUME MAX.”

•The volume level has no effect on recording.

On the remote control:

To increase the volume level, press AUDIO VOL +. To decrease the volume level, press AUDIO VOL –.

•When you press and hold either button, you can change the volume level continuously.

On the unit:

VOLUME +

To increase the volume level, turn the

VOLUME + / – control clockwise.

To decrease the volume level, turn the VOLUME

+ / – control counterclockwise.

–

Reinforcing the Bass Sound

The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume level

—Active Hyper Bass Pro (AHB PRO).

•This function only affects the playback sound, and does not affect your recording.

•This function also affects the sound from headphones.

To get the effect, press AHB PRO.

AHB PRO

(On the remote control) (On the unit)

The AHBPRO indicator also lights up on the display.

AHBPRO indicator

AHBPRO

•Each time you press the button, the Active Hyper Bass Pro effect turns on and off.

To cancel the effect, press AHB PRO repeatedly until “AHB PRO OFF” appears on the display.

The AHBPRO indicator goes off.

11